How to repair a disk partition that is not detected in Windows explorer 7

Sometimes when finished partitioning the hard drive in windows xp or windows 7 I have discussed in the post partition the hard drive, there is a problem that caused some of the definitions are not detected while accessing the windows explorer. This is usually caused by several factors, such as the partition is less than perfect, hard disk bad sectors, partition software bug, compatibilitas file system, etc..

In some cases that are sometimes found and asked by friends:

1. The first case of: Computer use a hard disk, disk partition when made 4 partition the drive (volume), but when not in windows explorer only detected 2 or 3 partitions only

2. Case 2: using two computer hard drives where each disk has 3 partitions, first of all Linux partitions on the hard drive detected in windows explorer, but on a second hard drive read only one or two partitions saa when accessed using windows explorer.

If you find a case like the one above, one of the free software that can be used to repair the disk partition is hidden (hidden partition) is a Partition Find & Mount. This software is small about 1.6 MB, but can be used for recovery and mounting hidden partition. For the personal user reading speed / 512 KBps data transfer.

Use of this software is very easy, simply by scanning mealkukan the software will automatically detect an existing partition on the hard drive. If you want to download this software partition software can be downloaded here

Make friends who are beginners please follow the procedures for using Partition Find and Mount software to activate the partition that does not appear in windows explorer in windows 7:

1. After installing the software on your computer. Open Partition Find and Mount software, it looks like this:

Click on one drive, in this example there are two hard drives, with a capacity of 1 terrabyte and 160 GB

2. Choose one of the main hard drive, in the example used hard drive capacity 160 GB

There are several options metodes scan:

a.Intellingent scan, the scan quickly, but sometimes the process of finding a partition less than the maximum, the method recommended by the program makers

b. Normal Scan scanning process is rather slow, can be used if the hidden partition is not detected by the method of Intelligent scan

c. Through Scan is a scanning metde doing searches on all areas of the drive in detail, but the scanning process much longer than the above two methods of scanning.

3. Select Intelligent Scan, wait until the process of scanning 100%

Visible part partition is the partition / drive that appear in windows explorer

Found on the partition is a partition that does not appear in windows explorer

Found in the partition select Partition1, right click select Mount kemdian As ..

On the Select the drive letter select A

Check the volume in Windows Explorer Open <

Click OK <

If the mounting process is successful, then the partition will automatically appear in windows explorer

Do it anyway partition mounting to 4

Note:

For the second hard drive do the scanning and mounting the drive as steps 1 to 3 above